Additel 295 Field Device Communicator
Additel 295 is an all-in-one field device communicator for configuring, calibrating, diagnosing and managing HART®, FOUNDATION™ Fieldbus and Profibus PA instruments. It supports both online and offline work for oil and gas, chemical, power and process plants.
The ADT295 integrates voltage/current measurement, current sourcing, 24 V loop power and precision loop diagnostics. With an ADT161 intelligent pressure module, users can communicate with a transmitter while acquiring reference pressure for field calibration.
The built-in DD library supports more than 2,600 devices. Wi-Fi and Bluetooth enable direct DD library and firmware updates, as well as document sharing without a computer.
- Configure, verify and diagnose HART, FOUNDATION Fieldbus and Profibus PA devices
- Field-calibrate current, voltage and pressure transmitters
- Test AI/AO cards using measurement, current sourcing and 24 V loop power
- Back up and restore parameters, run offline simulation and manage device configurations
- Log trends, troubleshoot control loops and maintain plant instruments
- Store, retrieve and share technical documents directly in the field
Configurations and accessories
ADT295: HART + Wi-Fi + Bluetooth Low Energy for HART communication and loop diagnostics.
ADT295-FF: adds FOUNDATION Fieldbus.
ADT295-FF-PA: adds FOUNDATION Fieldbus and Profibus PA.
Standard accessories: 9811-X power adapter, 9705 Li-ion battery, 9019 dual-branch test lead kit, two 9031 mini test-hook sets, 9052 USB-A to USB-C cable, 9040 magnetic hanging strap, 9041 hook and ISO/IEC 17025 calibration certificate.
Optional accessories: 9919-295 or 9919EX-295 carrying case, 9263 field protective sleeve and ADT161 intelligent pressure module.
| Operating system | Android, 8-core processor |
|---|---|
| Storage | 64 GB |
| Display | 5.0-inch capacitive touchscreen LCD, 720 × 1280, 60 Hz |
| Protocols | HART; FOUNDATION Fieldbus and Profibus PA depending on configuration |
| Voltage measurement | -1 to 1 V: 10 µV, ±(0.01% RD + 50 µV); 1 to 30 V: 0.1 mV, ±(0.01% RD + 1.5 mV) |
| Current measurement | ±30 mA; 0.1 µA resolution; ±(0.01% RD + 1.5 µA) |
| Current output | 0 to 24 mA; 0.5 µA resolution; ±(0.01% RD + 1.2 µA) |
| Loop supply | 24 V ±5%, 30 mA maximum load current |
| Battery | Standard 6,900 mAh Li-ion; optional 10,000 mAh |
| Battery life | Approx. 20 hours in measurement mode; approx. 14 hours with 24 V on and 12 mA output |
| Charging | USB Type-C with dedicated 5 V adapter; approx. 2.5 hours |
| Interfaces | USB 2.0 Type-C, Bluetooth, Wi-Fi, NFC |
| Environment | -20 to 50 °C operating; -20 to 70 °C storage; 0–95% RH non-condensing; up to 3,000 m |
| Protection | IP54; 1 m drop; 5 g vibration; 8 g mechanical shock; 48-hour salt spray |
| Dimensions | 192.3 × 96.5 × 55.3 mm |
| Weight | 0.8 kg |
| Compliance | CE |
| Warranty | 1 year |
- Cấu hình, kiểm tra và chẩn đoán thiết bị HART, FOUNDATION Fieldbus và Profibus PA
- Hiệu chuẩn bộ truyền dòng, áp và bộ truyền áp suất tại hiện trường
- Kiểm tra thẻ AI/AO với chức năng đo, phát dòng và nguồn vòng 24 V
- Sao lưu/khôi phục tham số, mô phỏng ngoại tuyến và quản lý cấu hình thiết bị
- Ghi xu hướng, xử lý sự cố vòng điều khiển và bảo trì thiết bị nhà máy
- Lưu trữ, tra cứu và chia sẻ tài liệu kỹ thuật trực tiếp tại hiện trường
