Additel 920/920HV Pneumatic High Pressure Test Pump
- Generate 3,000 psi (200 bar) in 40 seconds
- Minimal maintenance
- Hand-tight quick connectors
- First one in the world
The 920 and 920HV High Pressure Test Pumps
are hand operated pressure pumps designed to generate pressure from 95%
vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds
to reach 3,000 psi (200 bar). A high-quality screw press is designed
for fine pressure adjustment, with an adjustment resolution up to 10 Pa
(0.1 mbar). A specially designed shut-off valve makes the pressure as
stable as possible during calibration. A built-in gas-liquid isolator
protects the pump from moisture and dirt to reduce the need for
maintenance. The residual liquid in the pump introduced from devices
under test will be pushed out and collected during pressure release. Two
hand-tight quick connectors installed on the pump allow easy connecting
and disconnecting to the test pump without the need for PTFE tape or
wrenches. The 920 and 920HV are ideal comparison test pumps for pressure
instrument calibrations.
High Efficiency
Generate 3,000 psi (200 bar) in 40 seconds.
Adjustment Resolution
0.001 psi (10 Pa, 0.1 mbar).
High-quality screw press for fine pressure adjustment.
Great Stability
A specially designed shut-off valve makes the
pressure as stable as possible during calibration.
Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from
moisture and dirt.
The residual liquid in the pump introduced from
devices under test will be collected and then pushed
out and collected during pressure release.
Anticorrosive and wear resistant material are used to
improve the reliability further.
Hand-tight Quick Connectors
Allows easy connecting and disconnecting to the test
pump without the need for PTFE tape or wrenches.
